Tools Sockets
what are the basic complete tools for changing spark plugs?
I have no problems changing the plugs on the 4 cyl where just one plug may be a bit obstructed by an alternator, but what tool set will allow me to handle all, or nearly all, plug changes without getting underneath the car or becoming a contortionist. I have one swivel socket, 5/8, an extension, and a red plastic thng I use to start the plug I’m placing into the socket which i then turn by hand, followd by a turn from the socket wrench to tighten completely. I’ve been asked to do plug changes for the local senior complex..Thanks.
Here is a basic list of tools that will cover most of the situations you encounter:
- 5/8″ thin-wall spark plug socket
- 13/16″ thin-wall spark plug socket
(There are 2 different sized plugs. Make sure they are thin-walled as some plugs are recessed in small holes. Good sockets will have a rubber grip insert inside to hold the plug while you remove it so it doesn’t fall, you could also use it as a plug starter & leave it on the plug and just plug in the extension & tighten. You can also get sockets that have built-in swivels on the ends that you can use with the one you already have if needed.)
- 3/8″ drive ratchet
- 3/8″ drive extensions of various lengths (1″, 3″, 5″ 11″, 19″ are the ones I have and can be combined together as needed. The reason for the long ones are that sometimes the best way to access plugs are through the wheel well with the car jacked up slightly. Also nice for plugs in the back so that you aren’t crawling onto the car to reach them.)
- flashlight
- mirror on an pivotable extension shaft (they make them just for automotive type of work. Get a decent sized mirror of 2″x4″ or so to make it easy to use.)
- plug gap gauge (usually around $1-$2 at an auto parts store)
- can of compressed air (to blow dirt out around the base of the plug before removing it (find at most computer stores around $2-$4)
- plug wire puller may help for those tight spots
Sometimes it is necessary to move or remove engine parts (i.e. alternator, PS pump, A/C compressor, etc..) to gain access to certain plugs. A good set of metric and SAE combination wrenches and 3/8″ drive sockets can come in handy.
Hope that helps. Best of luck.
PROFORM Revolutionary Socket Assist Tool Set
|
|
Water Heater Socket Wrench Plumbing Tool $5.83 |
|
|
FIVE NEW PROMAN TOOL 6 Way Electrical Outlet Wall Plug Socket Splitters $9.99 |
|
|
Rolson Tools 36105 53pc Socket & Bit Set $35.86 |
|
|
Prima Tools 3690702360-DRIVE SOCKET ST-1/4″&3/8- $21.95 |
|
|
Monument 134f Socket Forming Tool 28mm $47.29 |
|
|
Monument 133c Socket Forming Tool 22mm $25.23 |
|
|
Monument 131w Socket Forming Tool 15mm $24.17 |
|
|
FAMEX Tools 10520 20 Piece Bit Socket and Socket Set for Torx, 3/8- 1/4 Inch $65.71 |
|
|
FAMEX Tools 590-SD-40 47 Piece High Class Socket Set, Metric, 1/4 Inch Drive $73.57 |
|
|
36 MM DEEP IMPACT SOCKET 36MM VW AXLE GLAND NUTS TOOL $21.99 |
|
|
4 GENERAL DEEP SHOWER VALVE WRENCHES FAUCET WRENCH SOCKET PLUMBING SINK TOOLS $9.99 |
|
|
NEW CHROME 189-PC SAE & METRIC TOOL SOCKET WRENCH SET $99.99 |
|
|
Rolson Tools 36159 52 piece Socket Set 1/4″-1/2″ $38.13 |
|
|
NEW CRESCENT 148-PC MECHANICS WRENCH SOCKET TOOL SET $99.99 |
|
|
Rolson Tools 38530 3/8″ Wrench & Socket 10,11,13,14,16,17,19mm $23.29 |
|
|
FAMEX Tools 10808 3 Piece Wheel Nut Socket Set, 17 / 19 / 21 mm $48.57 |
|
|
Prima Tools 3690702360-DRIVE SOCKET ST-1/4″&3/8- – Kit $26.34 |
|
|
Closet Pole Sockets from STANLEY Tools for Motor Homes $3.95 |
|
|
Prima Tools 3690702360-DRIVE SOCKET ST-1/4″&3/8- – Kit $32.92 |
|
|
Rolson Tools 36109 40 piece Socket Set 1/4″ & 3/8″ $14.03 |
|
|
CAL VAN tools 7pc torx sockets & 7pc torx bit set $30.00 |
|
|
CAL VAN tools 7pc torx sockets & 9pc square torx bits $35.00 |
|
|
Black & Decker CJ625 30-Watt 34-Ounce Citrus Juicer $13.36 Black & Decker CJ625 30-Watt 34-Ounce Citrus Juicer… |
|
|
Westinghouse T00448 2-Outlet Indoor Mechanical Timer, White $5.00 … |
|
|
Koolatron Multi-Purpose Adapter 110AC to 12 Volts DC ( Model AC-15) $29.99 Power your Koolatron(r) Cooler/Warmer at home or office with this AC Adapter. For use with all Koolatron(r) 12V Coolers and warmers and other 12V items. Over-load and over-charge protected…. |
|
|
1/2 Dr. 18mm Cr-Mo Impact Socket $4.31 … |
|
|
Philips 409904 / 423343 Dimmable AmbientLED 12.5-Watt A19 Light Bulb $16.55 Philips AmbientLED (TM) Dimmable 60W Replacement A19 LED Light Bulb – Soft Warm White Philips AmbientLED (TM) Dimmable 12.5W A19 LED light bulb has earn Energy Star (R) qualification and offers light quality comparable to that of traditional general incandescent 60W light bulb. A19 emits light in all directions and are commonly used in table and floor lamps, pendants, ceiling fixtures and general… |
|
|
Multi-Color E27 LED Light Bulb with Remote $4.00 Light-emitting diodes are darn cool and have found uses in so many places – traffic lights, standard lightbulb sockets and high-powered flashlights to name a few. The Multi-Color LED Lightbulb is a super bright LED bulb that can transition through dozens of color and rightness combinations and is compatible with a standard lightbulb socket. The included IR remote can select an individual color or … |
|
|
Feit Electric BPXN20/G8/3 Xenon 20-Watt, 120-Volt G8 Base, 3 Pack $7.99 This is a 3 pieces pack of XENON HALOGEN BULB 20 watts 120 volts JCD G8 Bi-Pin base clear finishFeatures: – New Xenon technology- White – cooler – longer life- Bi-pin, G8 base- Great for accent lighting, display or task lights- 20 Watt – 120 volt- Replaces American Lighting Part # LXCP-20BP… |
|
|
X-Gear Men’s Socket Wrench and Screwdriver Set $30.00 Socket wrench and screwdriver set… |
|
|
TEKTON 1040 1/2-Inch Drive Socket Set, SAE, 25-Piece $17.20 MIT 25-PC. 1/2″-DRIVE SOCKET SET features: Drop Forged Carbon Steel Ratchets, Sockets and Extensions are Heat Treated and Chrome Plated, Tapered 6-Point Socket Ends for Easy Access to Nuts and Bolts, Notches in Sockets Lock onto Ratchets or Extensions, Knurled Pattern on Ratchet Handles Provides Excellent Gripping Power, Convenient Triple-Spoke Reverse Levers, Spring Loaded Ball Bearings Lock Sock… |
|
|
Avid Cable Actuated Disc Brake Tool 3/8 Socket $7.67 The perfect tool for for removing and installing the locknut on Avid brake systems.Works with a 3/8″ Socket or wrench flats… |
This entry was posted on Sunday, April 2nd, 2006 at 5:38 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.