Thin Kerf
Where can I find cheap cigar box hinges?
I am looking for the cheap thin hinges you find on cigar boxes. If you can find it on woodcraft.com, it is not what I am looking for. They are not screwed in, nor are the inserted through a kerf saw blade. They are barbed, and look to be pressed or hammered into the actual wood of the box. I cannot find these anywhere, only jewelry box hinges that must be screwed in.
Example:
http://img11.imageshack.us/img11/7048/cigarboxhinge.jpg
Thanks!
Thanks, but I have seen the kerf ones and I do not want those.
These are a little different from yours, but they are the kerf cut type. Hope this helps.
Optimized Thin Kerf Gang Edger – Straight Sawing
|
|
Bosch 2609256975 ACZ65RT HM-Riff Thin Kerf Segment Blade for PMF 180 E Multifunc $49.26 |
|
|
Razor Saw,52 TPI $3.78 Great item from the Zona Tool Company…. |
|
|
Razor Saw,42TP I $3.70 For super fine cuts in wood, metal and plastic wooden handle extra stiff steel back, ultra thin 008 Blade…. |
|
|
Zona Ultra Thin Kerf Hobby Razor Saw (32 teeth per inch) $5.49 The thinnest razor saw available with a blade that is only .008 inch thick. Ideal for making super fine cuts in wood, soft metals, and plastic without causing splitting or ragged edges. This Ultra Thin Kerf Razor Saws also has a shorter cutting depth (7?16 inch) with steel back for added blade stability. Ultra Thin Kerf saws cut on the pull stroke. Blade is NOT Interchangeable or Replaceable…. |
|
|
Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand $1,170.00 With first-of-its kind design features, the Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand (TS3000) is built for effortless, efficient, and accurate cutting that lets you deliver products faster. And with its portable construction, which allows for transfer across even the roughest terrain, it makes an ideal addition to any work site..caption {font-family: Verdana, Helvetica neue… |
|
|
Freud D1080X Diablo 10-Inch 80-tooth ATB Finish Saw Blade with 5/8-Inch Arbor and PermaShield Coating $37.00 For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-d… |
|
|
Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor $18.86 Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade war… |
|
|
Analyzing Investments in Thin-Kerf Saws $2.99 The rising cost of hardwood sawlogs has increasd sawmill managers’ interest in considering the installation of thin-kerf sawing machines in their sawmills. Replacement of circular headrigs by band headrigs and/or reducing resaw kerfs are the available options. Equipment replacement or modification to achieve thin-kerf sawing will require an investment. Sawmill managers making such an investment wi… |
|
|
New thin kerf band resaw designed specifically for furniture.(IWF 2006 TECHNOLOGY TOUR): An article from: Wood & Wood Products $9.95 This digital document is an article from Wood & Wood Products, published by Thomson Gale on June 1, 2006. The length of the article is 473 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation DetailsTitle: New thin k… |
This entry was posted on Sunday, January 30th, 2005 at 9:56 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.