Pliers Carbide
Introduction to Glass Cutting Tools
Glass is undoubtedly one of the most popular materials used for different ornamental and industrial projects. Homeowners are recognizing the need to cut glass because more often, there are just simple tasks at home that need the ability and skill to do so. Thus, the popularity of glass cutting tools is a natural and phenomenal occurrence. These days, such glass cutting materials are proliferating across the market.
If you are not yet that familiar about the most useful and recommended glass cutting tools, there is a need for you to catch up. There are just too many of such items in the market these days and the number is continuously rising. Perhaps a trip to the hardware or home keeping shop will be effective and helpful to bring you the needed exposure.
Observe precautionary measures and extra care when handling glass materials for whatever purpose you may have. This is a logical and practical tip. You know that glass materials can easily cut you, especially if you are a little clumsy. However, even if you are extremely careful, you might still get some cuts if you try to cut glass without using the necessary and prescribed tools and instruments.
Here are some of the most commonly found glass cutting tools across the market. If you are out to buy any glass cutter you will initially encounter any of the following common glass cutting tools.
Solid brass glass cutter – The solid brass glass cutter is oil filled and is supplied with a professional quality cutting head. Usually, you can easily recognize and distinguish this glass cutting tool because it comes with a knurled handle that is painted creatively and impressively with dark gray and other colors. The brass oil filled plug is also o-ring sealed. The item is not very expensive, usually costing around $30 on the average.
Running pliers – You may not initially classify a running pliers as among glass cutting tools. However, you should get used to categorizing the object as one. In general, running pliers are used strategically to break glass along a line that is scored using a cutter. The tool has jaws that are coated with plastic and are angled to apply pressure into the glass in the spot where you may want to break it or cut it. The running pliers are among the cheapest glass cutting tools there are in the market, costing about $10 on the average.
Tile cutter or nipper – This is a professional quality type of cutter that is designed to conveniently cut small pieces and strips of glass materials. Aside from expertly and smoothly cutting stained glass, the item is also used popularly and widely as a cutting tool for ceramic tiles, shells, terrazzo and stones of about a quarter of an inch thick. Some people note that these glass cutting tools are most admirable and effective when used in mosaics. Thus, home keepers like this one because of its versatility and wider use. The average price on the market stands at about $30.
Pistol grip cutter – For requirements of cutting glass into longer and more precise strips, the pistol grip glass cutting tool is the most recommended. Usually, the instrument has a wheel that is carbide scoring glass and allowing for breakage along the especially scored line. This type of glass cutter is the most popular choice among home owners because of its wide availability. Beginners can even have the advantage of easily figuring out how this equipment is practically used. The average price tags stand at about $30. Not bad for a very helpful glass cutting tool.
About the Author
Mike L. provides best and reliable information about mirror and glass products including
glass cutting tools
. He is expert in provide details of drills, tapping and
standoff systems
.
Gerber Multi-Tools by US Cavalry
|
|
Glass and Tile Cutter Plier Tungsten Carbide Wheel New $12.95 |
|
|
Glass and Tile Cutter Plier Tungsten Carbide Wheel New $12.95 |
|
|
Glass and Tile Cutter Plier Tungsten Carbide Wheel New $14.99 |
|
|
Gerber 07550 Needlenose Multi-Plier 600, Black $42.50 There are about 600 reasons why the much-applauded Needlenose Multi-Plier belongs on your belt, but the most important ones are its profound versatility, failsafe performance, and rock-solid design and construction that also pleases the eye. It’s constructed of high-quality stainless steel with a black oxide coating to prevent corrosion, and it includes Gerber’s patented one-handed opening pl… |
|
|
Gerber 08239 MP800 Legend Multitool $54.50 We think they call it “Legend” for good reason: You’d be hard pressed to pack this many tools into the space that the Gerber Legend takes up. Inside this impressive little package, you’ll have access to no fewer than 12 tools, including tungsten carbide-steel blades. All the hardware is stainless steel, mounted on a nickel-coated die-cast aluminum handle set that feels like it was made for yo… |
|
|
Gerber 07500 Multi Plier MP600 Blunt Nose Carbide Insert Cutters With Sheath $39.10 The Multi-pliers 600 made form stainless steel and with an overall length of 6.3 in. includes one handed opening bluntnose pliers replaceable Tungsten carbide insert cutters wire crimper fine edge knife serrated knife cross point screwdriver small medium and large flat blade screwdriver lanyard ring can opener & bottle opener file ruler Ballistic nylon sheath Patented Sat.T.Plus locking system Inc… |
|
|
Meade Wire Cut Pliers Tungsten Carbide, 9-1/2 (240mm) length $1,129.99 Meade Wire Cut Pliers Tungsten Carbide, 9-1/2″ (240mm) lengthModel Number: PM-4137THIS ITEM COMES WITH A LIFETIME WARRANTY!All Instruments are special order items. All returns on Miltex Instruments will have a 25% restocking fee unless they are defective or we send the incorrect item…. |
|
|
Pin/Lig Cutter #150 Carbide $108.33 Pin/Lig Cutter #150 CarbideOur instruments are manufactured within the guidelines of the FDA quality assurance system for Good Manufacturing Practices and our factory is ISO 13485 certified. All our products bear the CE mark,emblematic of the European Communityâs highest standards. Product photo may not exactly match the product offered for sale. Please refer to the product description…. |
|
|
Pin/Lig Cutter #150S Carbide $111.47 Pin/Lig Cutter #150S CarbideOur instruments are manufactured within the guidelines of the FDA quality assurance system for Good Manufacturing Practices and our factory is ISO 13485 certified. All our products bear the CE mark,emblematic of the European Communityâs highest standards. Product photo may not exactly match the product offered for sale. Please refer to the product description…. |
|
|
Gerber 07505G Multi-Plier MP600 Bluntnose with Tungsten Carbide Inserts and Leather Sheath $69.95 Thanks to feedback we received from our men and women in uniform, we toughened up our Multi-Plier 600/’s by adding our patented replaceable tungsten carbide wire cutters to this already popular tool. When the cutters become dull or misshapen simply rotate the tungsten carbide cutters 120-degrees, and you/’ve got yourself a good-as-new wire cutter. After three rotations, the entire cutter can be re… |
|
|
Mintcraft MJ-T803082 8in Tile Cut/break Plier Tungsten carbide cutting whelel cuts up to 5/8” thick. Safety orange handles. Brand:MINTCRAFT Lgth. Ins.=8… |
|
|
Wiha 44527 Angled Extra Fine Points Bent 30, 3mm Long Tips Professional ESD Precision Tech Tweezers $18.95 Anti-static conductive, ESD safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant…. |
|
|
Wiha 44523 Long Rounded to 1.0mm Wide No Serration Professional ESD Precision Tech Tweezers $15.45 Anti-static conductive, ESD safe hypo allergenic tweezers made from Vommaloy. Special stainless steel, anti-magnetic and acid resistant…. |
This entry was posted on Thursday, March 2nd, 2006 at 2:20 pm and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.