Dream Home Improvement

Improvements that make your dream home possible

Lbs Torque

Lbs Torque

How To Replace Axles

Most of today’s cars are front wheel drive. In spite of continually advancing technology, the front drive axles will still wear out and need to be replaced. Here are some basic instructions on how to replace the front drive axles.

First, before raising the car with a jack and supporting it with jack stands, remove the hubcaps and loosen the axle retaining nut in the center of the wheel. Loosening the nut before raising the car is easier because the weight of the car holds the wheel in place for you because the nut is usually torque to over 150 ft. lbs. Then raise the car and remove the wheel. Removing the brake caliper is not necessary but may be removed if desired for ease of access. Next, remove the bolts connecting the strut to the steering knuckle. The drive axle has spines on the end that protrude through the wheel assembly. The axle should now push through the wheel assembly.

Once the outer end is loose, it is time to remove the axle from the transaxle housing. That end of the axle is also spined and has a decent cut around the shaft that holds a spring clip. The clip holds the axle in place in the transaxle. The clip is round and can be forced out of its nest. By far the easiest way to remove the axle is with a slide hammer attached to a large fork that fits over the end of the tripod housing. Another less conventional method is to use a pry bar between the tripod housing and the transaxle. This method must be used with care due to the high possibility of damaging the transaxle housing.

When reinstalling the axle, take extra care with the re-insertion of the axle into the transaxle. Pay special attention to the oil seal because it is possible that it can get torn, wrinkled, or damaged. After reassembly, front end alignment is recommended. Be sure to check and refill the transmission with fluid and torque the axle retaining nuts to the specified torque amount.

About the Author

Bond Mejeh produces automotive related articles for Quick Cash Auto, a cash for cars service. Quick Cash Auto not only buys pre-owned vehicles of any year, make or model, but they also provide numerous articles about vehicle repair and automotive news.

Please visit QuickCashAuto.com for more information and be sure to check out our automotive blog.

72 Roadrunner 650 HP 700Ft Lbs Torque Idling

eBay Logo  

Bommer Spring Loaded Torque Brass Door Hinges LB4312w-400-633 --- (2) in a box


Bommer Spring Loaded Torque Brass Door Hinges LB4312w-400-633 — (2) in a box


$8.00


Husqvarna 7021P 21-Inch 160cc Honda GCV160 Gas Powered 3-N-1 Push Lawn Mower With High Rear Wheels (CARB Compliant)


Husqvarna 7021P 21-Inch 160cc Honda GCV160 Gas Powered 3-N-1 Push Lawn Mower With High Rear Wheels (CARB Compliant)


$247.90


This efficient Husqvarna Push Mower features a compact design, making it easy to maneuver in tight spaces and three cutting systems: collection, mulch and side discharge. The handle folds for easy storage and transportation. Double ball-bearing wheels ensure smooth operation and durability. Offers 4-point, 9 position cutting height adjustment for varying lawn conditions. U.S.A. Engine Displacement…

Neiko 3/8-Inch 10-80 Foot-Pounds Automatic Torque Wrench


Neiko 3/8-Inch 10-80 Foot-Pounds Automatic Torque Wrench


$24.95


This is a 3/8-inch drive clicker type torque wrench, torque setting ranges from 10 to 80 feet-pounds. Fully reversible adjustable torque wrench, an outstanding value in a quality-engineered wrench; a must-have for auto, motorcycle or ATV work. Hard-to-find lower torque settings in 3/8″ drive; 10-80 foot-pounds. No guessing wrench setting, ‘clicks’ when you’ve reach your torque setting. Machined…

Bosch PS21-2A 12-Volt Max Pocket Driver


Bosch PS21-2A 12-Volt Max Pocket Driver


$94.99


Weighing in at 1.8 lbs., the Bosch PS21-2A 12-Volt Max Two-Speed Pocket Driver offers twice the torque of the competition, which makes it perfect for heavy-duty jobs. With a variable-speed trigger and two speed options (0-350 RPM / 0-1,300 RPM) and 20 clutch settings, this tool will allow for precise drilling and driving in wood, soft- to medium-bodied metal, and much more. The Bosch Universal Bit…

Power Ball Pro Gyro - The Gyroscopic Exerciser That is Capable of Speeds over 9,000 rmp and 25 lbs. of Torque


Power Ball Pro Gyro – The Gyroscopic Exerciser That is Capable of Speeds over 9,000 rmp and 25 lbs. of Torque


$23.95


Strengthen your wrist and avoid Repetitive Stress Injuries with the Dynaflex Pro Gyro Wrist Exerciser. The Pro Gyro spins at 15,000 RPMs exerting 25 lbs of isometric gyro torque. Regular use can increase grip strength and range of motion while strengthening muscles. Purchase includes starter cords and an instructional CD….

Conair Infiniti Nano Silver Tourmaline CeramicTM Hair Styler Model #228R


Conair Infiniti Nano Silver Tourmaline CeramicTM Hair Styler Model #228R


$64.99


The latest innovation from Infiniti by ConairTM uses Nano Silver Tourmaline CeramicTM technology to dry and style hair quickly, minimizing heat damage and leaving hair less frizzy and more manageable.
Nano Silver Tourmaline CeramicTM technology, ceramic disk technology and ionic technology
1875 watts
High torque motor
3 heat/2 speed settings
Cool shot
Hinged filter
Nano Silver Tourmaline Ce…

CONAIR 208S BURGUNDY INFINITI HR DRYR


CONAIR 208S BURGUNDY INFINITI HR DRYR


$38.13


TOURMALINE CERAMICTM IONIC TECHNOLOGY-ION OUTPUT HELPS SMOOTH THE CUTICLE LAYER CREATING SILKY\, SHINY HAIR; INFRARED ENERGY PROTECTS HAIR’S NATURAL LUSTER ; IONIC TECHNOLOGY REDUCES STATIC ELECTRICITY & LEAVES HAIR SILKIER\, SHINIER & MORE MANAGEABLE ; RETRACTABLE CORD RETRACTS INTO THE HANDLE WITH THE TOUCH OF A BUTTON ; HIGH TORQUE DC MOTOR DELIVERS MAX DRYING POWER TO SPEED UP STYLING ; COOL S…

P785SD Super-Duty Pan System (Closed Loop)


P785SD Super-Duty Pan System (Closed Loop)



Introducing the new P785SD Super-Duty, closed-loop, pan system. By incorporating the HS-785HB servo, this super-duty pan system offers full positioning feedback. A 4:1 gear reduction enables the pan to rotate 380 degrees given a standard pulse-width range (1050-1950usec). With up to 730 oz-in. of torque and aluminum framework, the P785SD is able to handle up to 30lbs (balanced load). Dual ABEC…


Cam Caddie Scorpion EX Pro Kit


Cam Caddie Scorpion EX Pro Kit


$229.95


The Cam Caddie Scorpion EX Pro Kit is a complete support system for HDSLR and small video cameras, and aids for convenient shooting, whether handheld or tripod-mounted. Consisting of the entire Scorpion line of products, the EX Pro Kit allows you to shoot with multiple accessories from microphones to video lights to external monitors. The Scorpion EX makes the backbone of the support system, and …

Gitzo GS3750D Panoramic Disk (Black)


Gitzo GS3750D Panoramic Disk (Black)


$199.89


Discs now feature Safe Lock – a special techno polymer that maximizes locking torque, eliminates micro movements and cuts vibration. The new leveling system made of three independent leveling bubbles on the quick release plate and one in the ball stem, always guarantee perfectly leveled images. The problem that affects many high quality heads in the market regarding drift angle is absolutely minim…

Wheeler Firearms Accurizing Torque Wrench


Wheeler Firearms Accurizing Torque Wrench


$43.41


The F.A.T. Wrench™ from Wheeler® brings perfect consistency to every screw on your rifle. This handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases problems in the field….


This entry was posted on Tuesday, September 7th, 2004 at 9:49 am and is filed under Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Leave a Reply





XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>